Silicone rubber for insole
summary
The special additive silicone rubber for insole is a two-component liquid silicone rubber. After adding an appropriate amount of bridging agent, it can be fully vulcanized after baking to form a flexible elastomer. It is composed of two components AB, with a ratio of 10:1 or 1:1.
characteristic
1. Simple operation, room temperature curing.
2. Good fluidity, easy operation and processing.
3. Good weather resistance, acid and alkali resistance, abrasion resistance and long service life.
4. The software and hardness are adjustable, with good practicability.
application
Production of insole products, such as insole, heightening insole and anti-skid insole.
Product parameters：
1. Weigh the required amount of component A, put it into a container 3-4 times larger, add component B with a weight ratio of 10:1 or 1:1 in proportion, fully stir and mix it evenly, and then use it after vacuum deaeration.
2.25 ° C operation time is 20-40 minutes, 80 ℃~120 ° C/30-40 minutes can be vulcanized.
3. The operation time and curing time can be adjusted according to customer needs
storage
To ensure the good quality of this product, it should be stored in a dry environment at room temperature of 25 ° C and in a sealed container. It should not be in contact with water or moisture to prevent viscosity increase, operation, time change and other deterioration.
Note that phosphorus, sulfur, amine, organic tin and other compounds may be poisoned by catalyst, which may cause the phenomenon of immature.
Conventional packaging
Packed in 25kg drums or 200kg drums.
